The ADIMLab Gantry Pro is a 3D printer that is worth exploring if you are looking for a low-cost printer to get you started. The Gantry 3D printer has some recent updates that include new features and better performance. Let’s explore these updates and how they can enhance your 3D printer experience.
No products found.
No products found.
Max Print Size: 310x310x410mm (12.2×12.2×16.14 inches)
File Format: STL, G-Code, AMF, OBJ
Supported Filament Types: PLA, ABS, HIPS, PC, Wood, TPU, PETG, PLUS carbon fiber, TPE soft rubber consumables, transparent consumables, fluorescent consumables, PVA water-soluble, PLA-CF carbon fiber, polyplus, HCPLA, Flexible PLA, wax, T-PLA
Filament Diameter: 1.75mm
Max Printing Speed: 150 mm/s
Extruders: Single Extruder
Extruder Diameter: 0.4mm
Printing Plate: heated
Design and Features – ADIMLab Gantry Pro
The ADIMLab Gantry Pro is an excellent choice for a lower-priced printer. It has a large print bed and some features that you might only expect to find on a more expensive model. When it comes to upgrades for their 3D printer, Gantry focused on quality and making their printer more feature-rich than other printers in the same price range. The printer uses FDM printing technology and can accept the most common print formats.
They made improvements to this 3D printer that included the addition of dual x-motors, z-motors, and more supports to improve the accuracy and stability of the platform. This gives it a sturdy, stable feel, and prevents drift. The Titan Direct extruder has cooling fans for the hot end.
The lattice glass is on the hot end, which makes the printer easier to level. It also makes it easier to get the first layer to stick and to remove the finished item. Of course, it is an entry-level printer, so the Gantry 3D printer has manual leveling. However, On this 3D printer, they included Mesh leveling, which is easier and more accurate than older manual leveling methods.
When it comes to a beginning level 3D printer Gantry took ease of setup into consideration. The printer comes 90% pre-assembled, and it takes only a few basic tools to finish getting it ready to print. The setup is easy and quick, even for those who have never done it before. They provide thorough instructions that are easy to follow.
Another feature that we like about the ADIMLab 3D printer is that it has a filament detector that will sense when the filament is almost out. It will stop the unit and allow it to cool until you can get the filament changed. All you do is to press “Resume”, and the unit will pick up again where it left off seamlessly. This is a feature that you find on many more expensive printers, but it is one that is not often found on the more affordable models, such as this one.
Another thing that we like about the Gantry 3D printer is that you have the option to upgrade the unit. You can purchase an upgrade that provides auto-leveling, an upgraded touchscreen, and Wi-Fi connectivity. This is another nice feature for a more affordably-priced 3D printer.
The entire unit is 26.46 pounds and has a small desk footprint. This makes it easy to move from place to place, and you do not have to dedicate much room to it. It can easily take up a small space on your desk. The frame is heavy aluminum. It feels durable, yet lightweight. The heated printing platform is also aluminum and has even heat distribution. The maximum platform temperature is 100°C, and the maximum extruder temperature is 260°C. It uses either an SD card or USB.
Printing – ADIMLab Gantry Pro
When it comes to 3D printers, the bottom line is how well they work and what you can expect your experience to be with them. This where an ADIMab 3D printer has an advantage. This one has impressive detail and accuracy. It is much more than a toy when it comes to the detail and quality of the object.
This 3D printer has an accuracy of +/-100 microns on the x and y-axis and an accuracy of +/-40 microns on the z-axis. The layer height ranges from 50-400 microns. This allows you to render some highly-detailed pieces with few errors. The quality of the piece is good enough to create some practical objects. It is not only limited to children’s toys, like many other entry-level printers. You could conceivably use this printer for a small home-based production unit. For a eimple home model 3D printer Gantry has excellent consistency from piece to piece.
The printer can use an impressive range of filament types, which allows you a wide range of possibilities of what you can do. The speed is not bad either at 120 mm/s. Of course, there are faster printers out there, but not in this price range. Overall, the print quality and experience with this unit was better than expected.
Packing And Assembly – ADIMLab Gantry Pro
Another thing that we like about this 3D printer is that it comes almost all pre-assembled. It only requires that you assemble three main pieces. You can do the assembly with a screwdriver, which is in the box. Everything that you need to assemble the unit and start printing is in the shipment package.
The unit comes tightly packed in foam that fits the printer components precisely. It is well-packed to avoid damage during transport. The components consist of the base and plate, frame, other brackets, and electronic components.
The unit is easy to assemble and only requires a few steps. The first thing that you do is to attach the glass to the base. Next, you assemble the overhead frame. The next step is to install the axis switches. The last step is to install the filament holder and extruder head. Now the unit is ready to level and test. The company has a handy Youtube video that shows the process clearly from start to finish.
In the box, you will find:
- Hot bed and lattice glass platform
- 24V 15A power supply
- Titan Direct extruder and light
- V5/V6 metal hot end with 2 fans
- Filament run-out detector
- Main board
- 4G SD card
- Filament older
- Binder clips
- Screwdriver
ADIMLab Support
ADIMLab has excellent support that is available by Skype at ADIMLab 3D Printer. You can also contact them by email at adimlab@gmail.com. They have a Facebook group where you can ask questions and get support at ADIMLab 3D Printer. The support staff is knowledgeable and responsive when you contact them by these methods.
In addition to contacting customer support, there are also plenty of helpful Youtube videos that cover everything from unboxing and assembly to troubleshooting. There is more than enough information available by a search query, too. Across the web, there are resources available from ADIMLab and from other experienced users.
Pros & Cons of The ADIMLab Gantry Pro
This 3D printer has many features that you would not expect from a printer in this price range. Every 3D printer has pros and cons. Here is a summary of what we liked, and what could be improved about the ADIMLab Gantry Pro.
No products found.
No products found.
Pros
- Recently updated with new features
- Long list of supported filament types
- Accepts most common file formats
- Heated bed
- Lattice glass for easy object removal
- Fast print speed for an entry-level 3Dprinter
- Dual x and z motors for stability
- Easy setup
- Easy “Mesh” leveling method
Cons
- Open frame, bed not protected
- No autoleveling without the upgrade
- Unit not protected from knocks and bumps
- Hot end exposed, not good for small children
Verdict
When you weigh the pros and cons of the ADIMLabs Gantry Pro, it has many more positives than negatives. It is an affordable, entry-level 3D printer that has much better quality than you might expect from a printer its price range. Although this could be considered a beginner printer, the quality of the prints is excellent.
The only drawback is its open design. This does not make it a good 3D printer for children who can get their fingers too close to hot, moving parts. However, if you do not have small children or pets, this is an excellent printer for most applications. The final verdict is that this printer is an excellent choice for those who want a simple printer to get started into the maker world.
Last update on 2024-11-14 / Affiliate links / Images from Amazon Product Advertising API
