ANYCUBIC Mega-S 3D Printer Specifications:
- Max Print Size: 8.27” x 8.27” x 8.07” (210x210x205mm)
- File Format: FDM (Fused Deposition Modeling)
- Supported Filament Types: ABS, PLA, TPU, PETG
- Filament Diameter: 1.75 mm
- Printer Speed: 20-100mm/s (suggested 60mm/s)
- Extruders: Single
- Extruder Diameter: 0.4mm/1.75mm
- Printing Plate: Heated
Design and Features
Every new computer incorporates the latest technological upgrades for faster and friendlier user experience. The Anycubic Mega-S printer embraces that “upgrade philosophy” with this latest incarnation of a printer that was already extremely popular.
As with the previous model, the ANYCUBIC Mega-S 3D Printer utilizes the same sturdy metal frame design. This provides the kind of consistent printing stability that is a herald for these machines.
The large base also offers the promise of printing a wide array of objects. That base still features a full-color touchscreen command pad. If you are familiar with the previous Anycubic Mega S 3D Printer model, then you’ll recognize the Anycubic Ultrabase heated bed that is part of this model. There is no need to improve on something that works.
This Ultrabase design provides for the first layer of your printed item to stick to that bed on its own. There is no need to mess around with glue, tape or hairspray to get your prints to “standstill.” When the printing cycle is finished and the cooling is complete, you’ll be able to easily detach the item from the bed without a lot of strain or scraping. It will be a smooth bottom finish every time.
One of the new features that you might not notice from looking at the printer is the ability for it to be more compatible with a wider range of flexible filaments. You will be able to utilize TPU, PETG, ABS, and PLA without a challenge. This next-generation 3D printer is also a perfect desktop device weighing in at only 24 lbs. and standing just 17.83 inches tall and 16.14 inches wide. You won’t need to take up a lot of room to put this printer into operation.
Printing
One of the model upgrades that has users buzzing is the newly designed extruder. An added extrude lever makes loading much simpler than the previous version of this printer. That will make transitioning from one print cycle to the next an easy task to accomplish.
There are also improved power recovery loss and filament run-out sensors. Why does that matter? Suppose there is a power outage or a kicked-out cable during your next print cycle. With the power outage feature, the ANYCUBIC Mega-S 3D Printer can pick up right where you left off to complete the print. This allows you to set up a print and then go about your business without having to “babysit” the device.
As for the filament run-out sensor, it is now positioned right behind the filament spool. Being securely attached to the printer frame makes is less precarious and more practical. That is actually how you can describe this entire device.
On one side of the printer, you’ll notice another new design element. That is where you’ll find a suspended spool holder. The location of the filament sensor has also been moved as a way to improve your user experience.
When it comes to printing results, the resolution for this printer is down to an impressive 50 microns. That will turn out a high-quality print with every use.
Packing and Assembly
According to Anycubic, you could just be 8 screws and three connected wires away from engaging in your first print. The fact that the printer is shipped semi-assembled is a major advantage for any of the first-time 3D printer users who might not be up to speed on all the technical specifications required for assembling a device like this. This is as close to “plug and go” as you might find in a 3D printer.
What comes with the Mega-S 3D Printer?
Along with the Mega-S 3D Printer, here is what will be included in the box:
- Power cord
- Data cable
- Shovel
- Tweezers
- Extra print head
- Memory card
- Card reader
- Extra limit switch
- Gloves
- 10 screws
- Tool kit
- Filament holder
- Plier
- Usual manual
- After service sales card
Support
Anycubic provides a one-year warranty on the printer and a lifetime of technical assistance. As long as you own the device, you will be able to get help with any troubleshooting issues direct from the support team at Anycubic.
Because of the popularity of this particular 3D printer, there is also a large online user community where further tips, hints and problem-solving issues can be addressed. Satisfied users are happy to share their experiences with this printer in forums and on YouTube tutorials. You might even find inspiration for your next print project.
ANYCUBIC Mega-S Pros & Cons
The Pros:
- Easy assembly and software interface allows the user to start printing “right out of the box.”
- Improved extruder reduces the risk of clogging and offers a higher print quality.
- Anycubic Ultrabase’s patented design provides superior adhesion without the need to glue or tape.
- The filament sensor alerts the user when the end of the spool is close and that can save time and money on a printing cycle.
- The auto-resume picks up printing where it was left off due to power disruption.
- The solid metal frame translates to exceptional stability during the printing process.
- Affordable price and ease of use make it a smart printer option for beginners.
- Lifetime pro-active technical support from Anycubic.
The Cons:
- Rattling noises during the printing cycle.
- The potential rocking of the frame may require a spacer for tabletop use.
- Risk of wires detaching from the bed.
- Print beds can become warped over time.
Verdict
The ANYCUBIC Mega-S Printer makes 3D printing accessible for users at all levels. The affordable price makes it a decent investment for a hobby or a small business. It might need some fine-tuning for a smooth operation but as a starter printer, it can’t be beaten.
Last update on 2024-12-21 / Affiliate links / Images from Amazon Product Advertising API
